Pneumatic bulkhead fitting selection starts with the two line connections and the panel that holds the fitting. Record what mates to each end, then check the mounting opening, panel thickness and access against the drawing for the exact model. A buyer can use this checklist to compare supplier proposals before committing to a fitting or machining a panel.
Identify the Bulkhead Fitting Series
Start with the complete model reference and its series. A short code can be ambiguous across catalogues. Include the product link, drawing or marked label with your inquiry so the supplier can identify the part before checking dimensions.

When to Ask for a Female-Thread Bulkhead Fitting
Ask for a female-thread bulkhead fitting when the layout calls for a panel crossing with a female-thread port. The PneuDock PMF series lists inquiry references and requests panel dimensions alongside tube and thread information. The PCF straight fitting series covers an in-line tube-to-thread connection. Confirm the mounting arrangement before selecting the series.
Pneuflex documents a PMF female-thread bulkhead fitting that connects a threaded component to tubing through a panel. Use that example to identify the connection layout. For a PneuDock inquiry, confirm the thread, dimensions and retention details against the drawing supplied for the requested model.
Record the Bulkhead Fitting Connection Details
Give each connection a temporary label. For a push-in end, provide the tubing outside diameter and applicable tube specification. For a threaded end, identify the thread standard, nominal size, gender and sealing interface. If a label only says “quarter inch,” include a photo or the original document and ask the supplier to identify the standard.
| Connection | Mating part | What to confirm |
|---|---|---|
| A | Existing tube | Outside diameter, units and tube specification for a push-in connection |
| B | Tube or threaded component | Tube specification or full thread designation and seal details |
| C, if present | Branch connection | Its own mating part and specification |
When the bulkhead fitting connection details include a push-in end, send the documented tube size using the fields in the pneumatic tubing inquiry guide. Keep tube diameter, fluid-port thread and panel opening in separate fields so the supplier can check each one.
Check the Bulkhead Fitting Mounting Hole Size
Read the bulkhead fitting mounting hole size and any applicable tolerance from the selected model’s drawing. For an existing panel, state the measured opening and any features such as flats or a nearby flange. For a new panel, confirm the drawing revision and retaining hardware before the fabricator cuts the opening.
Panel Thickness for Bulkhead Fittings
Confirm the allowable panel thickness for bulkhead fittings against the exact model and hardware stack. Report the thickness at the mounting point and list any extra layers, such as a backing plate or a gasket specified in the design. Ask which retaining parts come with the proposed fitting and which must be specified separately.
Check the space available on both sides for the fitting body, tool access and the tubing route. If the panel has a sealing or enclosure requirement, state it explicitly and request documentation covering that requirement for the proposed assembly.
Pneumatic Bulkhead Fitting Selection Example
In a hypothetical layout, both line ends match the drawing and the bulkhead fitting mounting hole size matches the existing opening. A nearby flange blocks access to the retaining nut. Send a marked layout showing that obstruction and request a drawing of the proposed arrangement with the access needed for assembly and service.
Build a Model-Specific RFQ
Use the pneumatic parts RFQ checklist to keep each fitting model on its own row. Include the full part reference, bulkhead fitting connection details, panel drawing revision, opening, panel thickness, quantity and any unresolved requirements.
Please confirm the model for the attached panel layout. The mating parts for ends A and B are listed separately. Provide the applicable mounting drawing and retaining hardware details, and flag any dimensions or operating requirements that still need confirmation.
When the quote arrives, match the drawing revision and the quoted model to the same line item. That link makes it possible to check what the supplier actually reviewed.
Buyer Questions
What if the Panel Thickness for Bulkhead Fittings Is Still Open?
Give the range the panel designer is considering and ask the supplier to identify which part of that range the proposed model accommodates. Confirm the final stack and tool clearance before releasing the drawing.
Can I Use a Drawing From Another Brand With the Same Code?
Request the selected model’s own drawing. Hole size, usable mounting length and hardware can differ even when the series labels look similar.
Send Your Panel and Connection Requirements
For pneumatic bulkhead fitting selection, start with the PneuDock bulkhead fitting range, then send your inquiry with the selected reference and the panel details you have confirmed.




